Product Specifications
General
TYPE:    Compact, Coaxial Differential Dispersion powered two-way system
FREQUENCY RESPONSE (3):    62Hz – 20kHz ±3dB, -10dB @ 50Hz
INPUT SENSITIVITY:    - 30dBu for 100dB SPL
MAXIMUM SPL (2):    122dB continuous / 128dB peak
DISPERSION:    110˚-80˚ horizontal, 60˚ vertical (user-rotatable)
CROSSOVER:    1.5kHz Active LR8 with low latency HF FIR equalisation.  Balance presets for pole mount/ pole mount with sub/ stage monitor
Module Audio input
CONNECTORS:    Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE:    20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL:    24.6 Vpp (+21dBu), over voltage protected
Internal Processing
Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct HPF
Low latency HF FIR filters
Up to 200ms input delay
Pre-set selection via rear panel switch
Driver
LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
Network
CONNECTORS:    2x Neutrik ® Ethercon RJ45
PROTOCOL:    TCP/IP and UDP/IP
Amplifier
TYPE:    2 channel switch-mode, class D
PEAK OUTPUT POWER:    2500W total  |  2000W LF, 500W HF
AVERAGE EFFICIENCY:    89%
COOLING:    External convection cooled, with internal fan
MAXIMUM AMBIENT TEMPERATURE:    40°C (104°F) for full output
Power Supply
TYPE:    Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE:    85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR:    > 0.98
NOMINAL POWER CONSUMPTION:    160W
MAINS CONNECTOR:    Neutrik® Powercon True1
Mechanical
ENCLOSURE:    Extensively braced multi-laminate plywood
FINISH:    Textured black PU coating
PROTECTIVE GRILLE:    HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth
FITTINGS:    Top hat for pole mounting  |  15 x M8 mounting points  |  Single pocket handle  |  Optional weather protection cowl
IP RATING:    IP24 factory option available
DIMENSIONS:    (W) 359mm x (H) 580mm x (D) 373mm  |  (W) 14.13in x (H) 22.83in x (D) 14.69in
WEIGHT:    28kg (61.6lbs) excluding Transit cover
ACCESSORIES:    Transit Cover   |  Optional wall, yoke and universal brackets
Notes
(1) Measured on-axis in free space (4π space) at 2 metres, then referred to 1 metre
(2) Measured in free space at 1 metre with a tone burst signal
(3) Measured on-axis on ground plane (2π space) at 2 metres, then referred to 1 metre
(4) Measured in half-space at 1 metre with a tone burst signal